What is the most expensive part of a bathroom remodel?

Usually the shower. In Austin, the biggest single price jump is moving a fixture, because the drain lines are in the slab. Here are the cost drivers in order, with real ranges.

Hester’s Ranch finished primary bathroom with freestanding tub and walk-in shower, hill country, TX

The most expensive part of a bathroom remodel is usually the shower: waterproofing, tile labor, the valve and plumbing, and the glass. In Austin, the biggest single price jump is relocating a fixture, because most houses sit on a concrete slab with the drain lines inside it. A full-gut bathroom with the plumbing staying in place runs $30,000 to $50,000 with us; reconfigure the layout and it runs $42,500 to $80,000.

Those ranges are from Prime Construction & Remodeling’s completed bathrooms in Austin and the hill country, published on our bathroom remodel cost guide. Below is the cost breakdown: the expensive parts of a bathroom renovation, in order, and what every homeowner should know about each one.

The most expensive parts of a bathroom remodel, ranked

RankCost driverWhy it costs what it does
1Shower or wet areaWaterproofing, tile setter labor on walls and floor, shower valve, niche, bench, glass
2Relocating fixturesCutting the slab, rerouting drains, inspection, repouring
3Tile and stonePorcelain tile or stone, grout and setting labor; floor-to-ceiling and patterned layouts take longer
4Vanity, cabinetry and countertopsCustom sizes, quartz or stone tops, linen towers
5Framing and window changesMoving walls, enlarging the room, resizing a window in a wet area
6Fixtures and glassFreestanding bathtub, faucets, showerheads, frameless enclosure
7What is behind the wallsHidden water damage, rot in the subfloor under an old shower pan, galvanized or cast iron lines

Why the shower costs the most

A shower is the only part of the bathroom built to be soaked every day. The waterproofing under the tile is what keeps water out of the framing and the slab, and it is the step you can’t see when the job is done. Tile labor is the other half: a tiled shower has walls, a floor sloped to the drain, a curb, often a niche and a bench, each cut and set by hand. Add the mixing valve, the drain, and a frameless glass enclosure, and the shower is often the largest single line in the budget. Most of that is labor costs rather than material costs: demolition, framing, the plumber, waterproofing and the tile setter all work in the shower area.

It is also where cutting corners costs the most later. A shower can leak for years before anyone notices, usually as a soft spot in the next room’s floor, a stain on a ceiling below, or loose tile at the curb. That is why we put a lifetime warranty on the shower pans we install, for as long as you own the home.

Why moving a toilet or shower costs so much in Austin

Most Austin houses are slab-on-grade. The drains run inside the concrete, so a fixture that moves means cutting the slab, rerouting the line, getting it inspected, and pouring back before any visible work begins. It also turns a simple job into a permitted one. Our guide to bathroom permits in Austin covers that side. Relocation is real cost, but it is one of several drivers, not the whole story. If you change the layout, the electrician usually follows the plumber, because lighting, outlets and the fan move with the fixtures.

Bathroom remodel cost in Austin by tier

TierWhat changesPrice rangeOn site
Full gut, plumbing in placeEverything new, fixtures stay where they are$30,000–$50,0003–4 weeks
Reconfigured layoutShower, tub or toilet moves; walls may move$42,500–$80,0004–6 weeks
Luxury primary suiteNew layout, premium stone, custom vanity, glass$67,500–$130,0006–8 weeks

A guest bathroom is cheaper than a primary, but by less than people expect. A smaller room uses less tile and stone, while waterproofing, plumbing, electrical and labor are nearly the same. Square footage isn’t what drives the number, which is why pricing a bathroom per square foot misleads more than it helps.

Is $10,000 enough to remodel a bathroom?

For a cosmetic refresh that leaves the shower alone (paint, a new vanity in the same spot, a new toilet, lighting and mirrors) it can be. For a full gut with a new tiled shower in Austin, no. Our full-gut range starts at $30,000, and the waterproofing and tile labor alone take a large share of a $10,000 budget.

Where it is safe to save, and where it isn’t

Save here:

  • Keep the toilet, sink and shower where they are. It is the largest saving available.
  • Choose a standard-size vanity over a custom one.
  • Use a simpler tile pattern on the walls and save the feature tile for one surface.
  • Pick mid-range fixtures from a reliable maker over high-end designer lines.
  • Use one floor tile throughout instead of separate tiles for the floor and the shower area.

Don’t save here:

  • Waterproofing and the shower pan.
  • The mixing valve inside the wall, which is expensive to reach later.
  • Ventilation. A fan ducted outside protects everything else you paid for.
  • The contingency. Hold back 10 to 15 percent on a house built before 2000; rot under an old shower pan is the most common discovery.

Does a bathroom remodel add value?

Some of it comes back. The national 2025 Cost vs. Value report estimates a midrange bath remodel recoups about 80 percent of its cost at resale, and an upscale one about 42 percent. If you are selling soon, the midrange tier is the safer bet. If you are staying, build the bathroom you will use. Our 30% rule guide shows how to size the budget to your home’s value.

A real example: Hester’s Ranch

The primary bathroom at Hester’s Ranch in the hill country shows where a luxury budget goes: an open walk-in shower with stone benches, niches and brass fittings, and a freestanding tub set between stone-clad windows. Most of that cost sits in the wet area and the stone, exactly as the ranking above predicts. See more on our bathroom remodeling page.

Frequently asked questions

What is the most expensive part of a bathroom remodel?

Usually the shower: waterproofing, tile labor, the valve and plumbing, and the glass enclosure. In Austin, relocating a fixture is the biggest single price jump because the drain lines run inside the concrete slab.

How much does a bathroom remodel cost in Austin?

With Prime Construction & Remodeling, a full gut with plumbing in place runs $30,000 to $50,000, a reconfigured layout $42,500 to $80,000, and a luxury primary suite $67,500 to $130,000.

Is $10,000 enough to remodel a bathroom?

For a cosmetic refresh that leaves the shower in place, it can be. For a full gut with a new tiled shower in Austin, no; our full-gut range starts at $30,000.

Why does moving a toilet cost so much?

Most Austin houses sit on a slab, so the drain is in the concrete. Moving the toilet means cutting the slab, rerouting the drain, having it inspected and repouring before visible work starts.

Is a guest bathroom much cheaper than a primary?

Cheaper, but by less than people expect. It uses less tile and stone, but the waterproofing, plumbing, electrical and labor are nearly identical.

Does a bathroom remodel add value to a home?

Partly. The 2025 national Cost vs. Value report estimates a midrange bath remodel recoups about 80 percent of its cost at resale and an upscale one about 42 percent.

Next

Want a number for your bathroom?

We will look at the room, tell you which tier it falls in, and where your money will go, the same day and at no charge.

Who wrote this

Prime Construction & Remodeling

A design-build remodeler at 705 N Bluff Dr in South Austin, founded in 2013 by Jesse Dadon. Kitchens, bathrooms, additions, ADUs and whole-home renovations across Austin and the hill country. NARI member, 5.0 from 200+ Google reviews.

Straight to a person

(512) 948-9398

One office, one number. We answer every message ourselves, the same business day during work hours.

Two years on workmanship · lifetime warranty on our shower pans · free first walkthrough

Call nowGet a price