Valburn Drive: The Austin Kitchen We Moved Across the House

The kitchen wasn’t in the wrong condition. It was in the wrong place. So we moved the whole thing — every fixture, every appliance, and two of the windows.

Valburn Drive — relocated kitchen in Northwest Hills, Austin, TX
Valburn Drive — farmhouse sink and unlacquered brass tap under the window, Northwest Hills, Austin, TX
Neighborhood Northwest Hills
Scope Full relocation
Investment $150,000
Tier Layout change

The problem

Most kitchen inquiries start with how the kitchen looks. This one started with how the house worked. The kitchen was tucked where it had always been, and everything about the way the family moved through the house had to bend around that decision.

You can refinish a kitchen in the wrong place and it will still be in the wrong place. The honest answer was to move it.

What that actually means

Relocating a kitchen is a different project from remodeling one, and the difference is almost entirely below the floor and inside the walls. The sink, the dishwasher and the range all have to arrive somewhere new — which means drainage, supply, gas and a considerably heavier electrical load, routed to a part of the house that was never asked to carry them.

In an Austin house on a slab, the drain lines are in the concrete. Moving them isn’t a plumbing job with a finish schedule attached to it. It’s cutting the slab, rerouting, inspecting and repouring — before a single visible thing happens.

The windows

The new layout only worked if the openings moved with it. Reframing a window in an exterior wall means a new header sized for what sits above it, the load carried down through new trimmers to the foundation, and the wall made weathertight again on the outside.

Then the part nobody photographs: making the new openings look like they were always there. Matching the exterior, getting the sill heights to agree with the rest of the elevation, and setting the interior trim so the room reads as original rather than altered.

Walk in today and nothing tells you the kitchen used to be somewhere else. That was the whole point.

What it cost, and why

$150,000 — the middle of our layout-change tier. Not because the finishes are extravagant, but because roughly a third of that number was spent on work that’s now invisible: concrete, drain lines, gas, electrical and framing.

That’s the honest arithmetic of moving a kitchen, and it’s the conversation worth having on the first visit rather than in month two.

Valburn Drive — the relocated kitchen seen from the living room, Northwest Hills, Austin, TX
The finished room

Sage green, brick, and brass that will age.

Custom cabinetry painted a deep sage, a brick backsplash carried up the range wall, a butcher block island, and unlacquered brass that is meant to patina rather than stay shiny.

Valburn Drive — sage green kitchen with a brick backsplash and butcher block island, Northwest Hills, Austin, TX
Valburn Drive — kitchen island and seating, Northwest Hills, Austin, TX
Valburn Drive — range wall and brick backsplash, Northwest Hills, Austin, TX
Valburn Drive — sage green cabinetry and unlacquered brass hardware, Northwest Hills, Austin, TX
Valburn Drive — glass-front upper cabinetry against the brick backsplash, Northwest Hills, Austin, TX
Valburn Drive — farmhouse sink and unlacquered brass tap under the window, Northwest Hills, Austin, TX
Start here

Thinking about moving your kitchen?

We will walk the house with you and tell you on the first visit whether the wall can come out, where the drains can go, and what it will take. No charge, and no drawings to pay for before you know.

Call nowGet a price